TG 1000 / TG 1020 Bandkontrolle Switch Function

Sämtliche Tonbandgeräte bis zum TG 1020
Antworten
Nachricht
Autor
DMcMahon
Neuling
Neuling
Beiträge: 5
Registriert: 08.12.2019, 21:04

TG 1000 / TG 1020 Bandkontrolle Switch Function

#1 Beitrag von DMcMahon » 02.01.2020, 16:47

Hallo Braun Tonbandfreunde,

I am new to the Forum and this is my first post, I think it will be simple for experienced Braun TG users.

What is the technical function of the "bandkontrolle" front panel push switch/button please ? I know that when switched/pushed in, that it switches off headphone output and the output to the DIN output, but I do not understand why/what it would be used for, I cannot easily find it referenced in the User instructions.

Vielen Dank im Voraus für alle Antworten

David

wickerge
Braun-Kenner
Braun-Kenner
Beiträge: 797
Registriert: 26.05.2009, 21:52

Re: TG 1000 / TG 1020 Bandkontrolle Switch Function

#2 Beitrag von wickerge » 02.01.2020, 19:54

Hello David,
the German term is exactly "Hinterbandkontrolle" which means read after write verify. So this is to check the quality of your recorded music during recording.

Herzliche Grüße
Gerhard

DMcMahon
Neuling
Neuling
Beiträge: 5
Registriert: 08.12.2019, 21:04

Re: TG 1000 / TG 1020 Bandkontrolle Switch Function

#3 Beitrag von DMcMahon » 02.01.2020, 21:13

Hello Gerhard,

Thank you very much, that is extremely helpful, so like what I would call on many other R2Rs "Tape Monitoring". Presently my 5 TG Brauns (and large number of other makes) have been archived away over Christmas to make room for visiting family members, I need to revisit them, now that I know what the switch does. In various posts previously I had seen "Hinterbandkontrolle referenced, I knew that one translation of Hinter is "behind" which I did not at the time understand.

Herzliche Grüße

David

DMcMahon
Neuling
Neuling
Beiträge: 5
Registriert: 08.12.2019, 21:04

Re: TG 1000 / TG 1020 Bandkontrolle Switch Function

#4 Beitrag von DMcMahon » 03.01.2020, 10:31

Hello Gerhard,

I meant to have asked you previously, is "bandkontrolle" referenced in the TG 1020 User Instructions Manual (Hinweise zum Gebrauch), if so on which page ?

Herzliche Grüße

David

Benutzeravatar
Paparierer
Moderator
Moderator
Beiträge: 1904
Registriert: 28.12.2010, 15:36
Wohnort: 85077 Manching

Re: TG 1000 / TG 1020 Bandkontrolle Switch Function

#5 Beitrag von Paparierer » 03.01.2020, 11:08

Hi David,
in the German manual it's on page 18, "Vor- und Hinterbandkontrolle".
You can get the [German] manual on >hifiengine.com<, but you'll have to register for that.

Kind regards,
Gereon

P.S. you got a pm
...meistens ist es was Mechanisches...
- wenn es nicht will, wende Gewalt an;
geht es kaputt, hätte es eh gewechselt werden müssen... :wink:

DMcMahon
Neuling
Neuling
Beiträge: 5
Registriert: 08.12.2019, 21:04

Re: TG 1000 / TG 1020 Bandkontrolle Switch Function

#6 Beitrag von DMcMahon » 03.01.2020, 15:53

Hello Gereon,

Thank you very much for that and also for the manuals. I do already have the manuals (from Hi-Fi Engine) and also previously purchased an original copy of the TG 1020 User instructions, but I obviously missed "bandkontrolle" when I read through them, a shame (for me) that the manuals are not available in English.

Best Regards

David

DMcMahon
Neuling
Neuling
Beiträge: 5
Registriert: 08.12.2019, 21:04

Re: TG 1000 / TG 1020 Bandkontrolle Switch Function

#7 Beitrag von DMcMahon » 14.02.2020, 19:35

I have never seen any of the Braun TG series manuals in the English language, does anybody know if any exist please ?

Antworten