PS 500 detail
PS 500 detail
Hello!
I am sorry but I don't know German language.
Can anyone help me?
I bought two turntables Braun ps-500 and the mechanism detail start-stop is broken in both tuntables. Could you advice where can I buy this detail?
If you can help me please send a personal message.
Thanks in advance!
Kind regards,
Alexey
Yekaterinburg, Russia
Guten Tag!
Ob jemand mir helfen kann?
Ich habe zwei Plattenspieler Braun PS 500 gekauft und in beiden Plattenspielern ist das Detail des Mechanismus der Starts-Füße (gebrochen Sie sehen das Foto).
Sie könnten nicht empfehlen, wo ich dieses Detail kaufen kann?
Wenn Sie helfen können, schreiben Sie ине die persönliche Mitteilung bitte.
Danke im Voraus!
Mit freundlichen Grüßen,
Aleksej
Jekaterinburg, Russland
I am sorry but I don't know German language.
Can anyone help me?
I bought two turntables Braun ps-500 and the mechanism detail start-stop is broken in both tuntables. Could you advice where can I buy this detail?
If you can help me please send a personal message.
Thanks in advance!
Kind regards,
Alexey
Yekaterinburg, Russia
Guten Tag!
Ob jemand mir helfen kann?
Ich habe zwei Plattenspieler Braun PS 500 gekauft und in beiden Plattenspielern ist das Detail des Mechanismus der Starts-Füße (gebrochen Sie sehen das Foto).
Sie könnten nicht empfehlen, wo ich dieses Detail kaufen kann?
Wenn Sie helfen können, schreiben Sie ине die persönliche Mitteilung bitte.
Danke im Voraus!
Mit freundlichen Grüßen,
Aleksej
Jekaterinburg, Russland
Hi!zbyszek hat geschrieben:The original part looks perfectly fine for me. Why do you say it's broken?I bought two turntables Braun ps-500 and the mechanism detail start-stop is broken in both tuntables.
The first part has radial wear from the pin, leading to shock loads and numerous cracks. A condition of the second part is even worse. A service man said that the use of these parts will lead soon to large mechanical damage.
Kind regards,
Alexey
Hello Alexey,
what is the material the replacement parts are made of? I see the danger that the replacement parts are mechanically less stable compared to the original parts.
On the other hand I do not see a danger for the rest of the turntable if you try to repair the original parts. It is a mechanically quite simple on/off switch and easy to understand. If you take away the platter and sub-platter and move the on/off knob, you will understand what the part does.
This is how it looks in my PS 500 - the part is also a little bit damaged, but still working:
Best Regards
Gerhard
what is the material the replacement parts are made of? I see the danger that the replacement parts are mechanically less stable compared to the original parts.
On the other hand I do not see a danger for the rest of the turntable if you try to repair the original parts. It is a mechanically quite simple on/off switch and easy to understand. If you take away the platter and sub-platter and move the on/off knob, you will understand what the part does.
This is how it looks in my PS 500 - the part is also a little bit damaged, but still working:
Best Regards
Gerhard
Hi Gerhard!wickerge hat geschrieben:Hello Alexey,
what is the material the replacement parts are made of? I see the danger that the replacement parts are mechanically less stable compared to the original parts.
On the other hand I do not see a danger for the rest of the turntable if you try to repair the original parts. It is a mechanically quite simple on/off switch and easy to understand. If you take away the platter and sub-platter and move the on/off knob, you will understand what the part does.
This is how it looks in my PS 500 - the part is also a little bit damaged, but still working:
Best Regards
Gerhard
The parts are made on the professional 3D-printer. The material as me said is a special glass bead filled polyamide with a high mechanical properties.
Kind regards,
Alexey
Re: PS 500 detail
hello.
can i by some of them from you?
do you still produce them?
greets,
tim
can i by some of them from you?
do you still produce them?
greets,
tim
- Paparierer
- Moderator
- Beiträge: 2644
- Registriert: 28.12.2010, 15:36
- Wohnort: 85077 Manching
Re: PS 500 detail
Hi TIm,
welcome to the Braun board!
This part is called "Steuerscheibe".
If Alex doesn't have any spare part left, you may contact the seller of this auction and ask him wether he makes some new ones.
Occasionally, these are offered on "ebay-kleinanzeigen.de" as well. (Maybe the same source?!)
Yours, Gereon
welcome to the Braun board!
This part is called "Steuerscheibe".
If Alex doesn't have any spare part left, you may contact the seller of this auction and ask him wether he makes some new ones.
Occasionally, these are offered on "ebay-kleinanzeigen.de" as well. (Maybe the same source?!)
Yours, Gereon
_______________________________
meistens ist es was mechanisches...
_______________________________
The price of anything is the amount of life you exchange for it.
Henry David Thoreau
meistens ist es was mechanisches...
_______________________________
The price of anything is the amount of life you exchange for it.
Henry David Thoreau
Re: PS 500 detail
Hello Tim.
the same seller is also on Ebay-Kleinanzeigen, maybe it is easier to contact him there:
https://www.ebay-kleinanzeigen.de/s-anz ... 0-172-1485
The item he is selling there is of course not the required part, but I think they are also available still.
Regards
Gerhard
edit Paparierer: This is who I meant - thank you Gerhard. Regards, Gereon
the same seller is also on Ebay-Kleinanzeigen, maybe it is easier to contact him there:
https://www.ebay-kleinanzeigen.de/s-anz ... 0-172-1485
The item he is selling there is of course not the required part, but I think they are also available still.
Regards
Gerhard
edit Paparierer: This is who I meant - thank you Gerhard. Regards, Gereon
Re: PS 500 detail
hey hey Gerhard and Gereon.
a while ago i bought on eBay 2 of these parts.
but the reseller doesn't respond me anymore.
i just looked it up. think it was from a Gerd I bought them.
not sure is the same guy.
but hey.
thanks anyway.
i contacted also a company here in belgium who would be able to reproduce them. but even them I'm missing some of the metallic parts this disc.
so...it's gonna be a long ride.
a while ago i bought on eBay 2 of these parts.
but the reseller doesn't respond me anymore.
i just looked it up. think it was from a Gerd I bought them.
not sure is the same guy.
but hey.
thanks anyway.
i contacted also a company here in belgium who would be able to reproduce them. but even them I'm missing some of the metallic parts this disc.
so...it's gonna be a long ride.
Re: PS 500 detail
Hello Tim,
yes, Gerd is the guy I was talking of. He produces really good quality parts from my experience. He also produces part the additional part mounted on the Steuerscheibe, since this is often missing also.
Best Regards
Gerhard
yes, Gerd is the guy I was talking of. He produces really good quality parts from my experience. He also produces part the additional part mounted on the Steuerscheibe, since this is often missing also.
Best Regards
Gerhard
Re: PS 500 detail
an other question.
i found a guy who can 3D print these parts.
but does anybody knows where i can find the metallic spare perts of this disc?
greetz,
tim
i found a guy who can 3D print these parts.
but does anybody knows where i can find the metallic spare perts of this disc?
greetz,
tim
Re: PS 500 detail
and.
i would print it in metal.
licht weight metal.
would that be a problem?
will be stronger and slightly heavier than the original part.
greets,
tim
i would print it in metal.
licht weight metal.
would that be a problem?
will be stronger and slightly heavier than the original part.
greets,
tim
Re: PS 500 detail
I'm still looking after these parts. can somebody help me?