PS 500 detail

Alle Braun HiFi-Plattenspieler ab dem PCS 5
Antworten
Nachricht
Autor
AlexP68
Neuling
Neuling
Beiträge: 6
Registriert: 04.04.2014, 18:59

PS 500 detail

#1 Beitrag von AlexP68 » 05.04.2014, 14:58

Hello!
I am sorry but I don't know German language.
Can anyone help me?
I bought two turntables Braun ps-500 and the mechanism detail start-stop is broken in both tuntables. Could you advice where can I buy this detail?
Bild

If you can help me please send a personal message.
Thanks in advance!

Kind regards,
Alexey
Yekaterinburg, Russia

Guten Tag!
Ob jemand mir helfen kann?
Ich habe zwei Plattenspieler Braun PS 500 gekauft und in beiden Plattenspielern ist das Detail des Mechanismus der Starts-Füße (gebrochen Sie sehen das Foto).
Sie könnten nicht empfehlen, wo ich dieses Detail kaufen kann?
Wenn Sie helfen können, schreiben Sie ине die persönliche Mitteilung bitte.
Danke im Voraus!

Mit freundlichen Grüßen,
Aleksej
Jekaterinburg, Russland

AlexP68
Neuling
Neuling
Beiträge: 6
Registriert: 04.04.2014, 18:59

#2 Beitrag von AlexP68 » 29.04.2014, 17:49

Hello!
Billet parts are ready. Now it is necessary to make axes and assemble. :)

Bild

Kind regards,
Alexey

zbyszek
Jungspund
Jungspund
Beiträge: 25
Registriert: 27.02.2014, 23:52
Wohnort: Krakau, Polen

#3 Beitrag von zbyszek » 30.04.2014, 21:50

I bought two turntables Braun ps-500 and the mechanism detail start-stop is broken in both tuntables.
The original part looks perfectly fine for me. Why do you say it's broken?

AlexP68
Neuling
Neuling
Beiträge: 6
Registriert: 04.04.2014, 18:59

#4 Beitrag von AlexP68 » 01.05.2014, 05:30

zbyszek hat geschrieben:
I bought two turntables Braun ps-500 and the mechanism detail start-stop is broken in both tuntables.
The original part looks perfectly fine for me. Why do you say it's broken?
Hi!
The first part has radial wear from the pin, leading to shock loads and numerous cracks. A condition of the second part is even worse. A service man said that the use of these parts will lead soon to large mechanical damage.

Bild

Kind regards,
Alexey

wickerge
Braun-Spezi
Braun-Spezi
Beiträge: 1167
Registriert: 26.05.2009, 21:52

#5 Beitrag von wickerge » 01.05.2014, 11:37

Hello Alexey,
what is the material the replacement parts are made of? I see the danger that the replacement parts are mechanically less stable compared to the original parts.

On the other hand I do not see a danger for the rest of the turntable if you try to repair the original parts. It is a mechanically quite simple on/off switch and easy to understand. If you take away the platter and sub-platter and move the on/off knob, you will understand what the part does.
This is how it looks in my PS 500 - the part is also a little bit damaged, but still working:


Bild

Best Regards
Gerhard

AlexP68
Neuling
Neuling
Beiträge: 6
Registriert: 04.04.2014, 18:59

#6 Beitrag von AlexP68 » 01.05.2014, 14:15

wickerge hat geschrieben:Hello Alexey,
what is the material the replacement parts are made of? I see the danger that the replacement parts are mechanically less stable compared to the original parts.

On the other hand I do not see a danger for the rest of the turntable if you try to repair the original parts. It is a mechanically quite simple on/off switch and easy to understand. If you take away the platter and sub-platter and move the on/off knob, you will understand what the part does.
This is how it looks in my PS 500 - the part is also a little bit damaged, but still working:


Bild

Best Regards
Gerhard
Hi Gerhard!
The parts are made on the professional 3D-printer. The material as me said is a special glass bead filled polyamide with a high mechanical properties.
Kind regards,
Alexey

AlexP68
Neuling
Neuling
Beiträge: 6
Registriert: 04.04.2014, 18:59

#7 Beitrag von AlexP68 » 11.06.2014, 18:34

Details are made:
Bild

timtim
Neuling
Neuling
Beiträge: 7
Registriert: 04.06.2020, 09:22

Re: PS 500 detail

#8 Beitrag von timtim » 07.06.2020, 23:32

hello.

can i by some of them from you?
do you still produce them?

greets,
tim

Benutzeravatar
Paparierer
Moderator
Moderator
Beiträge: 2606
Registriert: 28.12.2010, 15:36
Wohnort: 85077 Manching

Re: PS 500 detail

#9 Beitrag von Paparierer » 08.06.2020, 00:43

Hi TIm,
welcome to the Braun board!
This part is called "Steuerscheibe".

If Alex doesn't have any spare part left, you may contact the seller of this auction and ask him wether he makes some new ones.
Occasionally, these are offered on "ebay-kleinanzeigen.de" as well. (Maybe the same source?!)

Yours, Gereon
_______________________________
meistens ist es was mechanisches...
_______________________________
The price of anything is the amount of life you exchange for it.
Henry David Thoreau

wickerge
Braun-Spezi
Braun-Spezi
Beiträge: 1167
Registriert: 26.05.2009, 21:52

Re: PS 500 detail

#10 Beitrag von wickerge » 08.06.2020, 08:44

Hello Tim.
the same seller is also on Ebay-Kleinanzeigen, maybe it is easier to contact him there:
https://www.ebay-kleinanzeigen.de/s-anz ... 0-172-1485
The item he is selling there is of course not the required part, but I think they are also available still.

Regards
Gerhard

edit Paparierer: This is who I meant - thank you Gerhard. Regards, Gereon

timtim
Neuling
Neuling
Beiträge: 7
Registriert: 04.06.2020, 09:22

Re: PS 500 detail

#11 Beitrag von timtim » 08.06.2020, 15:22

hey hey Gerhard and Gereon.

a while ago i bought on eBay 2 of these parts.
but the reseller doesn't respond me anymore.

i just looked it up. think it was from a Gerd I bought them.
not sure is the same guy.

but hey.
thanks anyway.

i contacted also a company here in belgium who would be able to reproduce them. but even them I'm missing some of the metallic parts this disc.
so...it's gonna be a long ride.
:) :D

wickerge
Braun-Spezi
Braun-Spezi
Beiträge: 1167
Registriert: 26.05.2009, 21:52

Re: PS 500 detail

#12 Beitrag von wickerge » 08.06.2020, 16:11

Hello Tim,
yes, Gerd is the guy I was talking of. He produces really good quality parts from my experience. He also produces part the additional part mounted on the Steuerscheibe, since this is often missing also.

Best Regards
Gerhard

timtim
Neuling
Neuling
Beiträge: 7
Registriert: 04.06.2020, 09:22

Re: PS 500 detail

#13 Beitrag von timtim » 11.06.2020, 10:03

an other question.

i found a guy who can 3D print these parts.
but does anybody knows where i can find the metallic spare perts of this disc?

greetz,
tim

timtim
Neuling
Neuling
Beiträge: 7
Registriert: 04.06.2020, 09:22

Re: PS 500 detail

#14 Beitrag von timtim » 11.06.2020, 17:22

and.
i would print it in metal.
licht weight metal.
would that be a problem?
will be stronger and slightly heavier than the original part.

greets,
tim

timtim
Neuling
Neuling
Beiträge: 7
Registriert: 04.06.2020, 09:22

Re: PS 500 detail

#15 Beitrag von timtim » 27.04.2021, 23:50

I'm still looking after these parts. can somebody help me?

Antworten