At the moment I get an offering for a Braun RS1 with the possibility to connect it with a LV active speakersystem
Does this type RS1 really exist with the LV connection? I didn't knew it.
Can somebody give some advice.
N.b what is at the moment a fair price for the RS1?
Greetings,
Joop
Braun Reciever RS1 with LV connection?
Braun Reciever RS1 with LV connection?
Braun for your own High-End
-
- Moderator
- Beiträge: 2180
- Registriert: 16.09.2010, 14:50
- Wohnort: Leverkusen
Re: Braun Reciever RS1 with LV connection?
Hi Joop,
In the Braun Tax List the price is indicated between 150-250€; I bought mine for 50€. It bad a processor outlet, I dont know of it can be used for the LV.
Yours Andreas
In the Braun Tax List the price is indicated between 150-250€; I bought mine for 50€. It bad a processor outlet, I dont know of it can be used for the LV.
Yours Andreas
Viel Freude beim Hören !
Re: Braun Reciever RS1 with LV connection?
Hi,
as far as I know the processor outlet is in front of the volume pot and the tone control.
So it can not be used for the LVs.
Kind regards
Thomas
as far as I know the processor outlet is in front of the volume pot and the tone control.
So it can not be used for the LVs.
Kind regards
Thomas
-
- Moderator
- Beiträge: 2180
- Registriert: 16.09.2010, 14:50
- Wohnort: Leverkusen
Re: Braun Reciever RS1 with LV connection?
Hi Thomas,
you are wrong, the processor output socket is situated in the middle of the backside.
Greetings Andreas
you are wrong, the processor output socket is situated in the middle of the backside.
Greetings Andreas
Viel Freude beim Hören !
Re: Braun Reciever RS1 with LV connection?
Hi,
the RS1 doesn´t have an output for active speakers like LV 720. Of course you can change the internal wiring and use the processor output socket for the LVs.
Usually the processor output is after the preamplifier, but before volume, level and tone control.
Regards,
Raimund
the RS1 doesn´t have an output for active speakers like LV 720. Of course you can change the internal wiring and use the processor output socket for the LVs.
Usually the processor output is after the preamplifier, but before volume, level and tone control.
Regards,
Raimund
Re: Braun Reciever RS1 with LV connection?
That's what I intended to sayraimund54 hat geschrieben:...the processor output is after the preamplifier, but before volume, level and tone control.
Kind regards
Thomas