Privates Braun-Forum

Service manual says the platter should be 4mm from the faceplate... I really don't know how one can acheive that distance. I found a way.... by cheating. Making the platter beleive it is 4mm over the faceplate. I tried to make a spacer that I put between the sub platter and the platter. I made sure...

Thank you !!

The "distance nuts" are impossible to remove. They are very very very tight so I assume they are original to the chassis.
Service manual says the platter should be 4mm from the faceplate... I really don't know how one can acheive that distance.

Cheers

Here you can see that the blocking nuts (for the transport screws) are touching the faceplate. I supposed they should not ? Unless you put the screws. Is it normal ? From what I see even if I try to adjust the suspension springs those parts are blocking the chassis. That looks like it cuts the possi...

High :D Phil, if you open the player you will find three springs, which carrie the sub chassis. On the lower end of them you will find a special nut of round about 1,5 cm diameter and two notches a the side (and a lock nut). If you turn the special nut clockwise the spring will be stretched and the...

Thank you for the relpy !
I will try to figure that out.
One thing that got me worrying is that even with the screws on (which brings the chassis at its highest possible position) the platter drags....

Cheers
Remi

Hello Sorry for writing in English. I just got hold of a PS500. It is my second one. The problem is that the plate is rubbing on the faceplate and I can not figure what to do with the suspension as it appears to be at its highest position. Even with the blocking screws, the plat rubs when I turn it ...